Applying Wallpaper: What To Know

All things considered, wallpaper is a good product. It can be used to fill up any nook and cranny; it is easily customized and can make entire rooms look a million dollars. However, when it comes down to it, “what is wallpaper” is as useless as anything else.

There is a certain amount of people who would agree that wallpaper is something that’s just trying to hide something ugly. Some might say that there’s an artform to selecting the right wallpaper for the right room, and some might say that wallpaper is a practical necessity.

It’s true, but unless you’ve just opened a bathroom to find a breathtakingly beautiful and relaxing wallpaper that you’ve just had your water bill paid for by a generous relative, you may not have noticed it yet.

The word wallpaper originates from the Middle English word wappeldom, which comes from a Medieval Latin word wappa, meaning “cover.” During the Middle Ages and the Renaissance, in England, wallpapers referred to any kind of fabric used to decorate a room.

Wallpaper is also a design that covers the background of a computer monitor, television screen, or other similar screen surfaces. It is usually decorated with images that can be set to repeat at the desired interval.

The word “wallpaper” is derived from the phrase “to wallpaper.” The first printed wallpaper, or “banner wallpaper,” was created in 1593 by William I to decorate the hall of his Palace of Whitehall. It was made of linen-backed with white cotton and printed with a coat of arms and a device that illustrated the status of the owner.

So, you’ve made a choice—you’ve finally decided to wallpaper your room. Whether you’re starting from scratch or working from a paint-by-numbers kit, you want to achieve the look you want for your walls.

It is amazing to think that applying wallpaper to our walls is still a relatively new idea and one that still causes some confusion and doubt when applied properly. Even professional wallpaper installers can have trouble with the application and can end up with a mess that is neither as good as it could be nor as good as it should be.

Nowadays, people have a preference for wallpapers, especially for the walls of their rooms. If you are one of them, you may have already noticed how your wallpapers influence the way your room looks and feels. If you are also interested in applying wallpapers to your room walls, then we’ll be able to help you with a step-by-step guide we’ll be offering down below.

Step one: You should always start with flattening the wallpaper that you are going to use. Do this by unrolling your wallpaper, and then with the use of books or something else that is heavy, weigh them down so that they can lay flat. Patience is key; you should let it sit for an hour or maybe less.

Step two: The second step would be prepping the space where you’ll be doing your work. Remove everything from the wall; this could be light covers, nails, outlets, screws, and anything else that might bother the process of putting your wallpaper. After, always wipe the wall clean from dust or debris.

Step three: When you’re done with prepping your wall, you may start measuring the space where you’ll be putting your wallpaper. Measure the dimensions of the wall that you’ll be doing work at before you cut your wallpaper.

Step four: Now that you’re done with measurements, we move on to precutting the panels. Always remember that when you’re trying to cut your wallpaper, you should cut them a few inches bigger than what’s needed. Don’t worry because, before you start sticking them onto the wall, you’ll be cutting the excess.

Step five: We finally get to the applying part; during this, you’ll want to start with the corner. You should start peeling from the top left or the right corner and then start to align the design to the corner of your well; that’s when you start sticking.

Step six: This step is very important; you don’t want your wallpaper looking like a mess, so you should always properly line up, panel to panel, until the wall is fully covered.

Final step: After you’ve covered the whole surface, there will be excess, so when this happens, you can use a utility blade or simply scissors to remove it.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.